When do I use Bluetooth and when do I use the hardwire pairing cables?

To pair your devices wirelessly via Bluetooth, one device should be in (Lead Mode) and the rest in (Follow Mode).  Please note, in order to connect to the Joovv mobile app you will need to pair devices wirelessly using the above steps.

If you would prefer to hardwire your devices to eliminate the Bluetooth/WiFi signals you can do so by using the Hardwire Pairing Kit. Turn all of the devices to (Neutral Mode) and plug in the auxiliary cables.  For your convenience please follow the steps in the attached link. 


Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.